# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "gb"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Unknown monitor"
	HorizSync	30 - 64
	VertRefresh	50 - 100
	# Some Other Settings Found on Google
	# HorizSync    30 - 69
	# VertRefresh  50.0 - 120.0
	Option	    "dpms"
	UseModes	"MyModes"
EndSection

Section "Modes"
	Identifier "MyModes"
	#Original Mode Line
	Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -hsync -vsync
	# Others I found off google that might work.
#	Modeline "1024x480"     85      1024 1032 1152 1360     768 784 787 823
#       Modeline "1024x480" 65.00 1024 1032 1176 1244 480 488 494 563 -hsync -vsync
#       Modeline "1024x480" 65.00 1024 1032 1176 1344 480 491 493 525 -hsync -vsync
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "neomagic"
	VendorName  "Videocard vendor"
	BoardName   "NeoMagic MagicMedia 256AV (laptop/notebook)"
	Option	    "externDisp" ""
	Option	    "internDisp" ""
	#VideoRam        2560
        Option  "override_validate_mode"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection